30 Free Azure AZ-500 Practice Questions

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to prevent administrative users from accidentally deleting a virtual network named VNET1. The administrative users must be allowed to modify the settings of VNET1. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. The developers at your company plan to create a web app named App10598168 and to publish the app to <https://www.contoso.com>. The developers at your company plan to create a web app named App12345678 and to publish the app to <https://www.contoso.com>. You need to perform the following tasks: Ensure that App12345678 is registered to Azure Active Directory (Azure AD). Generate a password for App12345678. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to email an alert to a user named <admin1@contoso.com> if the average CPU usage of a virtual machine named VM1 is greater than 70 percent for a period of 15 minutes. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to create a new Azure Active Directory (Azure AD) directory named 12345678.onmicrosoft.com. The new directory must contain a user named user12345678 who is configured to sign in by using Azure Multi-Factor Authentication (MFA). To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to ensure that only devices connected to a 131.107.0.0/16 subnet can access data in the rg1lod1234578 Azure Storage account. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to collect all the audit failure data from the security log of a virtual machine named VM1 to an Azure Storage account. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to configure Azure to allow RDP connections from the Internet to a virtual machine named VM1. The solution must minimize the attack surface of VM1.To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to add the network interface of a virtual machine named VM1 to an application security group named ASG1. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to ensure that a user named user2-12345678 can manage the properties of the virtual machines in the RG1lod12345678 resource group. The solution must use the principle of least privilege. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to ensure that the rg1lod1234578n1 Azure Storage account is encrypted by using a key stored in the KeyVault12345678 Azure Key Vault. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to perform a full malware scan every Sunday at 02:00 on a virtual machine named VM1 by using Microsoft Antimalware for Virtual Machines. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Azure Username: <admin@abc.com>. Azure Password: XXXXXXXX. The following information is for technical support purposes only: Lab Instance: 12345678. You need to prevent HTTP connections to the rg1lod1234578n1 Azure Storage account. To complete this task, sign in to the Azure portal. This task might take several minutes to complete. You can perform other tasks while the task completes.    

Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. You are evaluating the security of the network communication between the virtual machines in Sub2. From VM1, you can successfully ping the public IP address of VM3.             

Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. You are evaluating the security of the network communication between the virtual machines in Sub2. From VM1, you can successfully ping the private IP address of VM3.             

Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. You are evaluating the security of the network communication between the virtual machines in Sub2. From VM1, you can successfully ping the private IP address of VM5.             

Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. You are evaluating the effect of the application security groups on the network communication between the virtual machines in Sub2. From VM1, you can successfully ping the private IP address of VM4.             

Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. You are evaluating the effect of the application security groups on the network communication between the virtual machines in Sub2. From VM2, you can successfully ping the private IP address of VM4.             

Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. You are evaluating the effect of the application security groups on the network communication between the virtual machines in Sub2. From VM1, you can connect to the web server on VM4.             

Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. You need to ensure that User2 can implement PIM. What should you do first?             

Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. Which virtual networks in Sub1 can User9 modify and delete in their current state?              

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com. You plan to deploy Azure AD Connect and to integrate Active Directory and the Azure AD tenant. You need to recommend an integration solution that meets the following requirements: Ensures that password policies and user logon restrictions apply to user accounts that are synced to the Tenant. Minimizes the number of servers required for the solution. Which authentication method should you include in the recommendation?

You need to deploy Microsoft Antimalware to meet the platform protection requirements. What should you do? 

Fabrikam, Inc. is a consulting company that has a main office in Montreal and branch offices in Seattle and New York. Fabrikam has IT, human resources (HR), and finance departments. Fabrikam has a Microsoft 365 subscription and an Azure subscription named subscription1. The network contains an on-premises Active Directory domain named Fabrikam.com. The domain contains two organizational units (OUs) named OU1 and OU2. Azure AD Connect cloud sync syncs only OU1. The Azure resources hierarchy is shown in the following exhibit. The Azure Active Directory (Azure AD) tenant contains the users shown in the following table. Azure AD contains the resources shown in the following table. Subscription1 contains the virtual networks shown in the following table. Subscription1 contains the network security groups (NSGs) shown in the following table. Subscription1 contains the virtual machines shown in the following table. Subscription1 contains the Azure Key Vaults shown in the following table. Subscription1 contains a storage account named storage1 in the West US Azure region. Fabrikam plans to implement the following changes: Create two application security groups as shown in the following table. Associate the network interface of VM1 to ASG1. Deploy SecPol1 by using Azure Security Center. Deploy a third-party app named App1. A version of App1 exists for all available operating systems. Create a resource group named RG2. Sync OU2 to Azure AD. Add User1 to Group1. Fabrikam identifies the following technical requirements: The finance department users must reauthenticate after three hours when they access SharePoint Online. Storage1 must be encrypted by using customer-managed keys and automatic key rotation. From Sentinel1, you must ensure that the following notebooks can be launched: Entity Explorer – Account. Entity Explorer – Windows Host. Guided Investigation Process Alerts. VM1, VM2, and VM3 must be encrypted by using Azure Disk Encryption. Just in time (JIT) VM access for VM1, VM2, and VM3 must be enabled. App1 must use a secure connection string stored in KeyVault1. KeyVault1 traffic must NOT travel over the internet. You need to configure support for Microsoft Sentinel notebooks to meet the technical requirements. What is the minimum number of Azure container registries and Azure Machine Learning workspaces required?         

You have an Azure web app named WebApp1. You upload a certificate to WebApp1. You need to make the certificate accessible to the app code of WebApp1. What should you do?

Your company plans to create separate subscriptions for each department. Each subscription will be associated to the same Azure Active Directory (Azure AD) tenant. You need to configure each subscription to have the same role assignments. What should you use?

You have an Azure subscription that contains the resources shown in the following table. User1 is a member of Group1. Group1 and User2 are assigned the Key Vault Contributor role for Vault1. On January 1, 2019, you create a secret in Vault1. The secret is configured as shown in the exhibit. User2 is assigned an access policy to Vault1. The policy has the following configurations: Key Management Operations: Get, List, and Restore. Cryptographic Operations: Decrypt and Unwrap Key. Secret Management Operations: Get, List, and Restore. Group1 is assigned an access to Vault1. The policy has the following configurations: Key Management Operations: Get and Recover. Secret Management Operations: List, Backup, and Recover. On January 1, 2019, User1 can view the value of Password1.  

You have an Azure subscription that contains the resources shown in the following table. User1 is a member of Group1. Group1 and User2 are assigned the Key Vault Contributor role for Vault1. On January 1, 2019, you create a secret in Vault1. The secret is configured as shown in the exhibit. User2 is assigned an access policy to Vault1. The policy has the following configurations: Key Management Operations: Get, List, and Restore. Cryptographic Operations: Decrypt and Unwrap Key. Secret Management Operations: Get, List, and Restore. Group1 is assigned an access to Vault1. The policy has the following configurations: Key Management Operations: Get and Recover. Secret Management Operations: List, Backup, and Recover. On June 1, 2019, User2 can view the value of Password1.  

You have an Azure subscription that contains the resources shown in the following table. User1 is a member of Group1. Group1 and User2 are assigned the Key Vault Contributor role for Vault1. On January 1, 2019, you create a secret in Vault1. The secret is configured as shown in the exhibit. User2 is assigned an access policy to Vault1. The policy has the following configurations: Key Management Operations: Get, List, and Restore. Cryptographic Operations: Decrypt and Unwrap Key. Secret Management Operations: Get, List, and Restore. Group1 is assigned an access to Vault1. The policy has the following configurations: Key Management Operations: Get and Recover. Secret Management Operations: List, Backup, and Recover. On June 1, 2019, User1 can view the value of Password1.  

You have Azure Resource Manager templates that you use to deploy Azure virtual machines. You need to disable unused Windows features automatically as instances of the virtual machines are provisioned. What should you use?

You have a Azure subscription. You enable Azure Active Directory (Azure AD) Privileged identify (PIM). Your company's security policy for administrator accounts has the following conditions: The accounts must use multi-factor authentication (MFA). The account must use 20-character complex passwords. The passwords must be changed every 180 days. The account must be managed by using PIM. You receive alerts about administrator who have not changed their password during the last 90 days. You need to minimize the number of generated alerts. Which PIM alert should you modify?